• Certified for seismic applications when used with the appropriate seismic mounting kit.

• Approved for Marine applications when used with listed compatible equipment. 

• One, expandable to two, isolated intelligent Signaling Line Circuit (SLC) Style 4, 6 or 7.

• Wireless fire protection using SWIFT Smart Wireless Integrated Fire Technology. See DN-60820.

• Up to 159 detectors and 159 modules per SLC; 318 devices per loop/636 per FACP or network node.

        – Detectors can be any mix of ion, photo, thermal, or multisensor; wireless detectors are available for use with the FWSG.

        – Modules include addressable pull stations, normally open contact devices, two-wire smoke detectors, notification, or relay; wireless modules are available for use with the FWSG.

• Standard 80-character display, 640-character large display (NCA-2), or display-less (a node on a network).

• Network options:

        – High-speed network for up to 200 nodes

        – Standard network for up to 103 nodes Up to 54 nodes when DVC-EM is used in network paging.

• 6.0 A switch mode power supply with four Class A/B built-in Notification Appliance Circuits (NAC). Selectable System Sensor, Wheelock, or Gentex strobe synchronization.

• Built-in Alarm, Trouble, Security, and Supervisory relays.

• Verifier® Tools online or offline programming utility. Upload/ Download, save, store, check, compare, and simulate panel databases. Upgrade panel firmware.

• Auto programming and Walk Test reports.

• Multiple central station communication options:

        – Standard UDACT

        – Internet

        – Internet/GSM

• 80-character remote annunciators (up to 32).

• EIA-485 annunciators, including custom graphics.

• Printer interface (80-column and 40-column printers).

• History file with 800-event capacity in nonvolatile memory, plus separate 200-event alarm-only file.

• Alarm Verification selection per point, with automatic counter.

• Presignal/Positive Alarm Sequence (PAS).

• Silence inhibit and Auto Silence timer options.

• March time/temporal/California two-stage coding/strobe synchronization.

• Field-programmable on panel or on PC, with Verifier Tools program check, compare, simulate.

• Full QWERTY keypad.

• Battery charger supports 18 – 200 AH batteries.

• Non-alarm points for lower priority functions.

• Remote ACK/Signal Silence/System Reset/Drill via monitor modules.

• Automatic time control functions, with holiday exceptions.

• Surface Mount Technology (SMT) electronics.

• Extensive, built-in transient protection.

• Powerful Boolean logic equations.

• Support for SCS Series smoke control system in HVAC mode.