• Listed to UL Standard 864, 9th Edition

• Backlit 80-character LCD display (20 characters x 4 lines)

• Mimics all display information from the host panel

• Control switches for System Acknowledge, Signal Silence, and Reset

• Control switches can be independently enabled or disabled at the FACP

• Key switch enables/disables control switches and mechanically locks annunciator enclosure

• Key switch can be enabled or disabled at the FACP

• Enclosure supervised for tamper

• System status LEDs for AC Power, Alarm, Trouble, Supervisory, and Alarm Silence

• Local sounder can be enabled or disabled at the FACP

• 315-080 connects to the Repeater-Bus terminal on the FACP and requires minimal panel programming

• Displays device type identifiers, individual point alarm, trouble, supervisory, zone, and custom alpha labels

• Time and date display field

• Surface mount directly to wall or to single, double, or 4” square electrical box

• Semi-flush mount to single, double, or 4” square electrical box. Use ANNSB80KIT for angled view mounting.

• Can be remotely located up to 6,000 feet (1,800 m) from the panel

• Backlight turns off during AC loss to conserve battery power but will turn back on if an alarm condition occurs

• May be powered by 24 VDC from the host FACP or by remote power supply (requires 24 VDC)

• Up to eight 315-080 repeaters can be connected on the RS485 Repeater-Bus